UCM6200 Series User Manual
Version 1.0.20.38
Figure 48: Create New Holiday
Table 19: Create New Holiday
Specify the holiday name to identify this holiday.
Create a note for the holiday.
Select the year of the Holiday.
Note: Users can now configure holidays for the next 4 years.
Select the month for the holiday.
Select the day for the holiday.
Check this option to show advanced options. If selected, please specify
the days as holiday in one week below.
Select the days as holiday in one week.
Enter holiday "Name" and "Holiday Memo" for the new holiday. Then select "Month" and "Day". The system
administrator can also define days in one week as advanced options. Once done, click on "Save" and then
"Apply Change" for the holiday to take effect. The holiday will be listed in the web page as the figure shows
below.