EasyManuals Logo

Grandstream Networks UCM6200 Series User Manual

Grandstream Networks UCM6200 Series
469 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
P a g e | 155
UCM6200 Series User Manual
Version 1.0.20.38
Skip Trunk Auth
If set to “Yes”, users can skip entering the password when making outbound calls.
If set to “By Time”, users can skip entering the password when making outbound
calls during the selected time condition.
If set to No”, users will be asked to enter the password when making outbound
calls.
Time Condition for
Skip Trunk Auth
If “Skip Trunk Auth” is set to “By Time”, select a time condition during which users can
skip entering password when making outbound calls.
Dial Trunk
Password
Configure personal password when making outbound calls via trunk.
Enable LDAP
If enabled, this extension will be added to LDAP Phonebook PBX list; if disabled, this
extension will be skipped when creating LDAP Phonebook.
Music On Hold
Select which Music On Hold class to suggest to extension when putting the active call
on hold.
Call Duration Limit
Configure the maximum duration of call-blocking.
Table 43: FXS Extension Configuration ParametersSpecific Time
Specific Time
Time Condition
Click to add Time Condition to configure specific time for this extension.
Batch Add Extensions
Batch Add SIP Extensions
To create multiple SIP extensions quickly, users can select "Batch" for the Select Add Method option during the
extension creation process.
Table 44: Batch Add SIP Extension Parameters
General
Create Number
Specify the number of extensions to be added. The default setting is 5.
Extension
Incrementation
Specify how much to increment each additional extension (e.g., if the value is 2, the
extensions will be 1000, 1002, 1004, etc.). Note: Supports up to 3 characters.
Extension
Configure the starting extension number of the batch of extensions to be added.
Permission
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Note: Users need to have the same level as or higher level than an outbound rule's
privilege to make outbound calls from this rule.
Voicemail
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
Disable Voicemail: Disable Voicemail.

Table of Contents

Other manuals for Grandstream Networks UCM6200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks UCM6200 Series and is the answer not in the manual?

Grandstream Networks UCM6200 Series Specifications

General IconGeneral
BrandGrandstream Networks
ModelUCM6200 Series
CategoryPBX
LanguageEnglish

Related product manuals