Grandstream Networks UCM6200 Series User Manual

P a g e | 394
UCM6200 Series User Manual
Version 1.0.20.38
Connecting to PMS
On the UCM WebGUI→Value-added Features→PMS→Basic Settings” set the connection information for the
PMS platform.
Table 123: PMS Basic Settings
Field
Description
PMS Module
Users can select the desired PMS module from the drop-down list.
• Hmobile.
• Mitel.
• HSC.
• PMS API
Wake Up Prompt
Prompt used when answering the wakeup calls it can be customized
from “PBX Settings→Voice Prompt→Custom Prompt.
PMS URL
Enter the PMS system URL.
If using “Hmobile” PMS Module only.
If
UCM Port
Enter the Port used by the PMS system. Default is 8081.
Username
Enter the Username to connect to the PMS system.
If using “Hmobile” or “HSC” PMS Module only.
Password
Enter the password to connect to the PMS system.
If using “Hmobile” or “HSC” PMS Module only.
Site
Enter the site to connect to the PMS system.
If using “Hmobile” PMS Module only.
Back Up Voicemail
Recordings
If enabled, this option allows backing up voicemail recordings to external
storage after check-out. Voicemail can be backed up to SD card, USB
disk, NAS, or an SFTP server
Email address
Configure the email address to send the backup to.
In order to use some PMS features please activate the feature code associated under “Call Features→Feature
Codes”
• Update PMS Room Status
• PMS Wake Up Service

Grandstream Networks UCM6200 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6200 Series
Category	PBX
Language	English