Figure 70: Template Management
Upload Model Template Package
In case the UCM6200 is placed in the private network and Internet access is restricted, users will not be able to
get packages by downloading and installing from the remote server. Model template packages can be manually
uploaded to the UCM.. Please contact Grandstream customer support if the model package is needed for manual
uploading.
Figure 71: Upload Model Template Manually
Device Configuration
On Web GUI, page Value-added Features→Zero Config→Zero Config, users could create new device, delete
existing device(s), make special configuration for a single device, or send NOTIFY to existing device(s).
Create New Device
Besides configuring the device after the device is discovered, users could also directly create a new device and
configure basic settings before the device is discovered by the UCM6200. Once the device is plugged in, it can
To Next Page
Loading...
Need help?
General
