UCM6200 Series User Manual
Version 1.0.20.38
Specify the domain name to be used in the Email when using type
"MTA".
Specify the SMTP server when using type "Client".
Username is required when using type "Client". This is typically the
email address.
Password for the entered Username.
Toggles the Email-to-Fax feature.
If enabled, the UCM will monitor the configured email inbox (using
provided [Username] and [Password]) for emails with the subject
"SendFaxMail To XXX" or “XXX”.
Subject example: SendFaxMail To 7200 Or 7200.
The UCM will extract the attachments of detected emails and send it to
the XXX extension by fax. The attachment must be in PDF/TIF/TIFF
format.
Note: This field will appear when using Type “Client”.
Email-to-Fax
Blacklist/Whitelist
Enables the Email to fax Blacklist/Whitelist functionality.
Specify the Email subject format for fax sending, the subject can be
either "
SendFaxMail To XXX
" or “
XXX
" with XXX the fax number.
Internal Blacklist/Whitelist
Specify the Email address blacklist/whitelist for local extensions. This
feature prevents faxing from unauthorized email addresses. The
internal list includes only contacts with local extensions.
External Blacklist/Whitelist
Specify the Email address blacklist/whitelist for non-local contacts. This
feature prevents faxing from unauthorized email addresses. The
external list is for non-local contacts.
Note: Multiple addresses can be separated with semicolon (;) i.e.
" XXX;YYY ".
Configure the POP/POP3 server address for the configured username
Example: pop.gmail.com
Configure the POP/POP3 server port for the configured username
Example: 995
Specify the display name in the FROM header in the Email.
Specify the sender's Email address.
For example: pbx@example.mycompany.com.