UCM6200 Series User Manual
Version 1.0.20.38
Keep Voicemail after
Emailing
Configure whether or not to retain the voicemail in local storage after
sending the voicemail attachment in the email notification.
If enabled, empty SDP packet will be sent to the SIP server periodically to
keep the NAT port open. The default setting is “Yes”.
Configure the Keep-alive interval (in seconds) to check if the host is up.
The default setting is 60 seconds.
If selected, this extension will be disabled on the UCM6200.
Note: The disabled extension still exists on the PBX but cannot be used
on the end device.
Configure the user's first name. This field supports alphanumeric
characters, underscores (_), and periods.
Configures the user's last name. This field supports alphanumeric
characters, underscores (_), and periods.
Configure the user's email address. Email notifications will be sent to this
address.
Configure the password for user portal access. A random password is
automatically generated by default and is highly recommended for
security.
Select the voice prompt language that will be used for this extension. By
default, the selected voice prompt language under PBX Settings->Voice
Prompt->Language Settings will be used. To add more supported
languages, please download the voice prompt language packages in the
same page.
The maximum allowed number of endpoint registrations to this extension.
Default value is 1.
Configure a phone number for the extension. Users can dial the Direct
Dial Mobile Phone Prefix feature code (*88 by default) + extension
number to directly dial this number. Example: Dial *881000 to call the
mobile number associated with extension 1000.
To Next Page
Loading...
Need help?
General
