Grandstream Networks UCM6200 Series User Manual

P a g e | 151
UCM6200 Series User Manual
Version 1.0.20.38
Analog Station
Select the FXS port to be assigned for this extension.
Caller ID Number
Configure the CallerID Number that would be applied for outbound calls from this
user.
Note: The ability to manipulate your outbound Caller ID may be limited by your VoIP
provider.
Permission
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound rule's privilege
to make outbound calls using this rule.
Voicemail
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
• Disable Voicemail: Disable Voicemail.
• Enable Local Voicemail: Enable voicemail for the user.
Voicemail
Password
Configure the password to access the extension's voicemail. A randomly generated
password is used by default and is highly recommended for security. Only digits are
supported.
Skip Voicemail
Password
Verification
If enabled, users can skip password verification when dialing in via the My Voicemail
feature code. This option is disabled by default.
Disable This
Extension
If selected, this extension will be disabled on the UCM6200.
Note: The disabled extension still exists on the PBX but cannot be used on the end
device.
User Settings
First Name
Configure the user's first name. This field supports alphanumeric characters,
underscores (_), and periods.
Last Name
Configures the user's last name. This field supports alphanumeric characters,
underscores (_), and periods.
Email Address
Configure the user's email address. Email notifications will be sent to this address.
User Password
Configure the password for user portal access. A random password is automatically
generated by default and is highly recommended for security.
Language
Select the voice prompt language that will be used for this extension. By default, the
selected voice prompt language under PBX Settings->Voice Prompt->Language
Settings will be used. To add more supported languages, please download the voice
prompt language packages in the same page.

Grandstream Networks UCM6200 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6200 Series
Category	PBX
Language	English