This option shows up only when "By DID" is selected. This controls the
destination that can be reached by the external caller via the inbound route.
The DID destination are:
• Extension
• Conference
• Call Queue
• Ring Group
• Paging/Intercom Groups
• IVR
• Voicemail Groups
• Fax Extension
• Dial By Name
• All
Select the default destination for the inbound call.
• Extension
• Voicemail
• Conference Room
• Call Queue
• Ring Group
• Paging/Intercom
• Voicemail Group
• Fax
• DISA
• IVR
• External Number
• By DID
When "By DID" is used, the UCM will look for the destination based on
the number dialed, which could be local extensions, conference, call
queue, ring group, paging/intercom group, IVR, voicemail groups and Fax
extension as configured in "DID destination". If the dialed number
matches the DID pattern, the call will be allowed to go through.
• Dial By Name
• Callback
• Announcement
Specify the number of digits to strip from the beginning of the DID. This is
used when "By DID" is selected in "Default Destination".
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
To Next Page
Loading...
Need help?
General
