NEC Univerge SV8100 - Page 214

Issue 10.1 UNIVERGE SV8100
2 - 178 Program 15 : Extension, Basic Setup
08
Automatic Handsfree
Use this option to set whether
pressing a key accesses a
One-Touch Key or if it preselects
the key.
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
1
10
Ringing Line Preference for
Trunk Calls
Use this option to select between
Idle and Ringing Line Preference
for trunk calls.
0=Idle (Off)
1 = Ringing (On)
1
11
Callback Automatic Answer
Use this option to enable or disable
automatic answer of calls recalling
to a station. For example, if a
Transfer Recall or Hold Recall is
ringing back to a station, the
following happens:
If PRG 15-02-11 is enabled, the
station will automatically answers
the recall when it goes off-hook.
If PRG 15-02-11 is disabled, a
station does not automatically
answer the recall when it goes
Off-Hook. The user must first press
the line appearance of the recalling
call or press the answer key.
0=Off
1=On
1
12
Off-Hook Ringing
Use this option to set the telephone
Off-Hook signaling. Off-hook
signaling occurs when a telephone
user receives a second call while
busy on a handset call. To enable/
disable Off-Hook Signaling for an
extension Class of Service, use
Program 20-13-06.
0 = Muted Off-Hook
Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker & Handset
Beep
0 (OT)
5 (AU)
13
Redial List Mode
Select whether the Redial List
feature should store internal and
external numbers (0), or only
external numbers (1).
0 = ICM/Trunk (Extension/
Trunk Mode)
1 = Trunk Mode
1
15
Storage of Caller-ID for
answered call
0 = Disable (Off)
1 = Enable (On)
1
16
Handsfree Operation
Enable or disable an extension
ability to use the speakerphone on
outside calls. When disabled,
users can hear the conversation,
but cannot respond handsfree.
0 = Disable (Off)
1 = Enable (On)
1
Item
No.
Item Input Data Default
Related
Program