NEC Univerge SV8100 - Page 49

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 13
For DTI (T1) PKG Setup
20
Network Exchange Selection
Select the ISDN protocol for the ISDN
circuit.
0 = Standard (same as NI-2)
1=reserved
2=reserved
3 = DMS (A211)
4 = 5ESS
5 = DMS (A233)
6 = 4ESS
7=NI-2
0
21
Number of Ports
0=Auto
1=4 Ports
2=8 Ports
3=12 Ports
4=16 Ports
5=20 Ports
6=24 Ports
7=28 Ports
0
22
QSIG Operation Mode
0 = Disable
1 = Enable
0
23
Straight/Cross Wiring
0 = Auto
1 = Manual (Cross)
2 = Manual (Straight)
0
Physical Port Number 01~30
Item
No.
Item Input Data Default
01
Logical Port Number
The start port number of a T1 line is
displayed, and 24 logic ports are
automatically assigned to a DTI (T1)
line.
0~200
0
02
T1 Signal Format Selection
0 = D4 (12 Multi Frame)
1 = ESF (24 Multi Frame)
0
03
Zero Code Suppression
0=B8ZS
1 = AMI/ZCS
0
04
Line Length Selection
0 = 0 feet ~ 133 feet
1 = 133 feet ~ 266 feet
2 = 266 feet ~ 399 feet
3 = 399 feet ~ 533 feet
4 = 533 feet ~ 655 feet
0
Item
No.
Item Input Data Default