Figure 66: The MNC to NDC Mapping page displays the mappings that you have created
Deleting MNC to NDC Mappings
Follow these steps to delete a single or multiple mappings simultaneously.
1. Go to Configuration > Services & Profiles.
2. On the sidebar under Services, click HLR.
The HLR submenu appears.
3. Click MNC to NDC Mappings.
4. Delete a single mapping or multiple mappings.
5. To delete a single mapping:
a) From the list of existing mappings, locate the mapping that you want to delete.
b)
Under the Actions column, click the icon that is in the same row as the mapping.
A confirmation message appears.
c) Click Yes.
The page refreshes, and the mapping that you deleted disappears from the view list.
6. To delete multiple mappings simultaneously, follow these steps:
a) From the list of existing mappings, locate the mappings that you want to delete.
b) Select the check boxes before the mappings that you want delete.
c) Click Delete Selected.
A confirmation message appears.
d) Click Yes.
The page refreshes and the mappings that you deleted disappears from the list.
You have completed deleting MNC to NDC mappings.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
162
Configuring Services and Profiles
Configuring HLR Services
To Next Page
Loading...
