Figure 98: Syslog server settings
Event Severity Levels
The severity level of an event is displayed and used by administrators and registered by monitoring
tools to indicate how severe or important an event is.
Table 6 describes the event severity levels (1 to 6, with 1 being the most severe) that the controller
follows.
Table 11: Event severity levels in the controller
DescriptionMessageLevel
A critical condition that must resolved immediatelyCritical1
An error condition that must be resolvedMajor2
An error condition that must be checked to determine if it
needs to be resolved
Minor3
Warning message, not an error, but indication that an error
will occur if action is not taken
Warning4
Normal operational messages - may be harvested for
reporting, measuring throughput, etc. - no action required.
Informational5
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
206
Configuring the System Settings
Configuring General System Settings
To Next Page
Loading...
