The AP Zones of Mobile Virtual Network Operator section refreshes. The AP zone or
zones that you selected appears in the section.
4. In Configure the WLAN services, follow these steps to configure the WLAN services to which
the MVNO account that you are creating will have management privileges.
a) In the WLAN services section, click Add WLAN(s).
b) In SSID, select the WLAN to which the MVNO account will have management privileges.
NOTE: You can only select one WLAN service at a time. If you want to grant the MVNO
account management privileges to multiple WLAN service zones, select them one at time.
c) Click Apply.
The WLAN services section refreshes. The WLAN service or services that you selected
appears in the section.
5. In Create the Super Administrator Account, follow these steps to create the MVNO account
and define the logon details and management capabilities that will be assigned to the account.
a) Scroll down to the Super Administrator section.
b) In Account Name, type the name that this MVNO will use to log on to the controller.
c) In Real Name, type the actual name (for example, John Smith) of the MVNO.
d) In Password, type the password that this MVNO will use (in conjunction with the Account
Name) to log on to the controller.
e) In Confirm Password, type the same password as above.
f) In Phone, type the phone number of this MVNO.
g) In Email, type the email address of this MVNO.
h) In Job Title, type the job title or position of this MVNO in his organization.
i) In the Assign Capabilities to Administrator Role tree (located on the right side of the
form), select the administrator capabilities that you want to assign to this MVNO.
If you plan to grant this MVNO most of the capabilities that are available, click Select All,
and then clear the check boxes for the capabilities that you do not want this MVNO to
have.
j)
Remember to click the icon next to each folder to view all capabilities that are included.
6. In RADIUS Server for Administrator Authorization and Authentication, follow these steps
to add a RADIUS server for authenticating this MVNO.
NOTE: If you want to use a primary and secondary RADIUS servers for authenticating
administrator, follow the steps in Using a Backup RADIUS Server for Authorizing and
Authenticating MVNOs on page 265.
a) In the RADIUS Servers for Administrator Authorization and Authentication section,
click Create New.
The RADIUS Servers for Administrator Authorization and Authentication form appears.
b) In Name, type a name for the RADIUS service.
c) In Realm, type the realm or realms to which the RADIUS server belongs.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
263
Managing Mobile Virtual Network Operator Accounts
Creating a New MVNO Account
To Next Page
Loading...
