Figure 152: Select Administration Domain in the domain tree to view all existing AP
zones
When you go to the Monitor > AP Zonespage, the Administrator Domainis selected by
default in the domain tree, which results in all existing AP zones being displayed in the table.
2.
If you want to view only AP zones that belong to a particular subdomain (denoted by the
icon in the domain tree), click the subdomain icon.
The table refreshes and displays only AP Zones that belong to that subdomain.
Table 14: AP zone details on page 284 lists the AP zone details that are shown in the table.
Table 14: AP zone details
DescriptionColumn Name
Name of the AP zone. Clicking the AP zone name (link) loads a page
that displays detailed information about the zone. See Viewing the
Configuration of an AP Zone on page 286.
Zone Name
Administration Domain or subdomain name to which the AP zone
belongs. Clicking this link displays detailed information about the
Administration domain or subdomain.
Management Domain
Brief description of the AP zoneDescription
Ruckus Wireless firmware version that is installed on the APs that belong
to the zone
AP Firmware
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
284
Monitoring AP Zones, Access Points, and Wireless Clients
Monitoring AP Zones
To Next Page
Loading...
