Ruckus Wireless Virtual SmartZone - Page 325

2. After you have created an AP zone, go to Configuration > AP Zones.
3. On the AP Zone List page, click the name of the AP zone that you have created to go to its
configuration page.
The configuration page for that AP zone appears.
4. On the sidebar, click Guest Access.
The Guest Access page appears.
5. Click Create New.
The Create New Guest Access Portal form appears.
6. In General Options, configure the following:
• Portal Name
• Portal Description
• Language
7. In Start Page under Redirection, set where users will be redirected after they log in
successfully:
• Redirect to the URL that user intends to visit: You could redirect users to the page that
they want to visit.
• Redirect to the following URL: You could set a different page where users will be
redirected (for example, your company website).
8. In Guest Access, configure the following:
a) Guest Pass SMS Gateway: If you want to send the guest pass to users using SMS and
you configured an SMS server earlier, select the SMS server. Otherwise, select Disabled.
b) Terms and Conditions: To require users to read and accept your terms and conditions
prior to use, Show Terms And Conditions check box.
The box below, which contains the default Terms of Use text, becomes editable. Edit the
text or leave it unchanged to use the default text.
c) Web Portal Logo: By default, the guest hotspot logon page displays the Ruckus Wireless
®
logo.
To use your own logo, click the Upload button, select your logo (recommended size is
138 x 40 pixels, maximum file size is 20KB), and then click Upload.
d) Web Portal Title: Type your own guest hotspot welcome text or accept the default
welcome text (Welcome to the Guest Access login page).
9. In User Session, configure the following:
a) Session Timeout: Specify a time limit after which users will be disconnected and required
to log on again.
b) Grace Period: Set the time period during which clients will not need to re-authenticate
after getting disconnected from the hotspot.
Enter a number (in minutes) between 1 and 14399.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
325
Working with Local, Guest, and Remote Users
Working with Local, Guest, and Remote Users