Xerox Phaser 6300 - Page 226

Print-Quality Troubleshooting 5-15
6
Check the Developer Drive Assembly,
PL8.1.1, for damage or wear.
Symptoms can be all colors, only one
color, and only CMY color. If CMY
color only is bad (black is good), this is
most likely the root cause.
Complete Go to Step 8.
7
Replace the Developer Frame
Assembly (
page 8-78).
Does the image quality improve?
Complete Replace the Engine
Control Board
(page 8-104).
Troubleshooting Procedure Table (Continued)
Step Actions and Questions Yes No