Theory of Operation 2-39
Tray 1 (MPT)
â– Feed Roller
When the Tray 1 (MPT) Feed Solenoid energizes, the Gear MPT and the Idler
Gear are engaged by the force of the solenoid spring. The Feed Roller rotates
from the drive of the Main Drive Assembly and feeds paper from Tray 1. After
rotating one turn, the Gear MPT and the Idler Gear are disengaged, the Main
Drive Assembly and Feed Roller stop, allowing only one sheet of paper to be fed
through at a time.
â– Tray 1 (MPT) No Paper Sensor
Detects whether print media is present.
â– Tray 1 (MPT) Feed Solenoid
Controls the operation (rotation/stop) of the Tray 1 (MPT) Feed Roller.
â– Size Guides
Indicates the paper width, maximum capacity, and holds the paper in proper
alignment for feeding.
No Paper Sensor
Feed Solenoid
Gear MPT
s6300-350
Tray 1 (MPT)
Feed Roller
To Next Page
Loading...
Need help?
General