Service Parts Disassembly 8-21
Paper Feeder
Feeder Chute (PL3.1.2)
1. Remove Tray 2.
2. Push in and then down at the two recesses located at the left and right of the
Feeder Chute and swing the Feeder Chute downward.
3. Pull the Feeder Chute forward past the detent, and then down to release the
bosses located at each end.
Replacement Note
Insert the left side boss of the Feeder Chute first.
s6300-139
Feeder Chute
To Next Page
Loading...
