Wiring Diagrams 10-13
Wiring Diagrams
Notations Used in Wiring Diagrams
The following describes the legend used in the wiring diagrams shown on the
following pages.
Symbol Description
Denotes a plug.
Denotes a jack.
Denotes Pin yy and Jack yy of the connector Pxx and
Jxx.
Denotes a Jumper Point (JPxxx/xxx). Each end of the
Jumper connection has a numeric designation.
Denotes the parts.
PL X.Y.Z implies the item "Z" of plate (PL) "X.Y" in Parts
List.
Denotes functional parts attached with functional parts
name.
Denotes the control and its outline in PWB.
Denotes a connection between parts with harnesses or
wires, attached with signal name/contents.
Denotes the function, and logic value of the signal to
operate the function (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
P/JXX
YY
JPxxx
Fuser
PL X.Y.Z
Heater
Control
DEVE_A
CLUTCH ON(L)+24VDC
To Next Page
Loading...
