Xerox Phaser 6300 - Paper Path Route

Theory of Operation 2-17
Paper Path Route
s6300-07
7
Paper Feed From Tray 4
Paper Feed By
"Tray 4 Feed Roller"
Paper Feed From Tray 3 Paper Feed From Tray 2 Paper Feed From Tray 1
Paper Feed By
"Tray 1 Feed Roller"
And
"Retard Roller"
Paper Feed By
"Tray 3 Feed Roller"
Paper Feed By
"Tray 2 Feed Roller"
Paper Feed By
"Roller Assy"
And
"Tray 4 Feed Roller"
Paper Transfer By
"Tray 4 Turn Roller"
And
"Tray 4 Turn Chute"
Paper Feed By
"Roller Assy"
And
"Tray 3 Feed Roller"
Paper Feed By
"Roller Assy"
And
"Tray 2 Feed Roller"
Paper Transfer By "Tray 3 Turn Roller"
And "Tray 3 Feeder Chute Assembly"
Paper Transfer By "Turn Roller" And "Feeder Chute"
Paper Transfer By "Tray 1 Turn Roller" And "Turn Pinch Roller"
Paper Transfer By "Rubber Regi Roller" And "Metal Regi Roller" Of Registration Chute Assembly
Paper Transfer By "IDT2" Of Imaging Unit And "Transfer Roller"
Paper Transfer By "Heat Roller" And "Fuser Belt"
Paper Transfer By "Exit Roller Assembly" And "Fuser Pinch Roller"
Paper Transfer By "Exit Roller" And "Exit Pinch Roller" Of Chute Assembly Out
Print Output
Paper Transfer To Duplex Path
By Reversing "Exit Roller"
Paper Transfer By "Duplex Roller"
And "Duplex Pinch Roller"