Xerox Phaser 6300 - Registration Sensor (PL4.1.3)

8-36 Phaser 6300/6350 Color Laser Printer Service Manual
Registration Sensor (PL4.1.3)
Caution
After removal of the Imaging Unit, protect the Developer Assemblies by
covering the rollers with a sheet of paper or other similar technique.
1. Open Door A.
2. Remove the Imaging Unit.
3. Remove the Registration Chute (page 8-38).
4. Remove the Registration Chute In (page 8-34).
5. Disconnnect the connector (P/J181) from the Registration Sensor.
6. Release the 3 hooks that secure the Registration Sensor to the Registration Chute
In and remove the sensor.
s6300-155