Xerox Phaser 6300 - Printer Options; Hard Drive; Additional Memory; Configuration Card

1-8 Phaser 6300/6350 Color Laser Printer Service Manual
Printer Options
Phaser 6300/6350 printer options include:
■ 20 GB Hard Drive
■ Additional Memory
■ Configuration Card
■ 1100-Sheet Feeder
■ 550-Sheet Feeder
Hard Drive
A 20 GB Hard Drive is available to enable the Job Collation, Saved Jobs, Proof,
Personal, and Secure Print options. The Hard Drive installs on the Image Processor
Board with stand-offs and connects to the board with a single data/power connector.
Hard Drive utilization appears on the Configuration page.
Additional Memory
The printer features two slots that accept 256 or 512 MB of high-speed DDR RAM.
All combinations are allowed for 256, 512, 768 MB and 1 GB. Memory modules
must have the following characteristics:
■ DDR PC2700 Memory Standard
■ 200-Pin SODIMM
■ Unbuffered, Non-parity
■ Serial Presence Detect
■ 2.5 Volt
■ CL 2.5
The Startup page and the Configuration page list the amount of RAM installed in the
printer. Installed memory not meeting the above specifications, is ignored by the
printer.
Configuration Card
A Configuration Card identifies the printer configuration, stores shadowed non-
CRUM consumable data, consumable life counts, and network configuration
parameters.