Safety vii
Service Safety Summary
General Guidelines
For qualified service personnel only: Refer also to the preceding Power Safety
Precautions.
Avoid servicing alone: Do not perform internal service or adjustment of this
product unless another person capable of rendering first aid or resuscitation is present.
Use care when servicing with power: Dangerous voltages may exist at several
points in this product. To avoid personal injury, do not touch exposed connections and
components while power is on. Disconnect power before removing the power supply
shield or replacing components.
Do not wear jewelry: Remove jewelry prior to servicing. Rings, necklaces and
other metallic objects could come into contact with dangerous voltages and currents.
Warning Labels
Read and obey all posted warning labels. Throughout the printer, warning labels are
displayed on potentially dangerous components. As you service the printer, check to
make certain that all warning labels remain in place.
Safety Interlocks
Make sure all covers are in place and all interlock switches are functioning correctly
after you have completed a printer service call. If you bypass an interlock switch
during a service call, use extreme caution when working on or around the printer.
CLASS 1 LASER PRODUCT
The Phaser® 6300/6350 Color Laser Printer is certified to comply with Laser Product
Performance Standards set by the U.S. Department of Health and Human Services as
a Class 1 Laser Product. This means that this product does not emit hazardous laser
radiation; which is possible only because the laser beam is totally enclosed during all
modes of customer operation. When servicing the printer or laser unit, follow the
procedures specified in this manual and there will be no hazards from the laser.
To Next Page
Loading...
