8-10 Phaser 6300/6350 Color Laser Printer Service Manual
Front Cover (PL1.1.6)
The Control Panel harness is connected between the Front Cover and Door B. Be
careful not damage the harness while removing the cover. Also, the Upper Exit Cover
is not captive to the Chute Assembly Out and can fall as the Front Cover is removed.
1. Open Door B.
2. Remove 2 screws (self-tapping, plastic 10 mm) that secure the Front Cover to
Door B.
3. Release the 4 hooks that secure the Front Cover to Door B.
4. Unplug connector (P/J220) from the Control Panel. and remove the Front Cover.
s6300-127
Door B
Chute Assembly Out Chute Assembly Out
Front Cover
Door B
To Next Page
Loading...
