Xerox Phaser 6300 - No Toner Sensor (K) (PL7.2.5)

8-88 Phaser 6300/6350 Color Laser Printer Service Manual
No Toner Sensor (K) (PL7.2.5)
1. Remove the Top Main Cover (page 8-8).
2. Remove the Right Side Cover (page 8-12).
3. Remove the Left Side Cover (page 8-13).
4. Remove the Rear Cover (page 8-16).
5. Unplug connector (P/J704) from the No Toner Sensor.
6. Spread the 4 hooks on the Toner Cartridge Holder that secure the sensor.
7. Remove the No Toner Sensor from the Toner Cartridge Holder.
s6300-206
P/J704
No Toner Sensor (K)