Xerox Phaser 6300 - Print-Quality Modes

2-6 Phaser 6300/6350 Color Laser Printer Service Manual
The Developer Frame Assembly, Imaging Unit, and numbered references to the "Print
Process Block Diagram" on page 2-2, are detailed in the following figure.
Print-Quality Modes
There are four print-quality modes:
:
Print-Quality Mode Description
Automatic Automatically selects the optimal print-quality mode for the paper type
selected. For example, Photo print-quality mode is used when
printing on Glossy Paper and Standard print-quality mode is used
when printing on Plain Paper. (This setting is only available in the
printer driver.)
Standard 1200 X 600 dpi resolution. High-speed, general-purpose mode for
crisp, bright, color prints. Recommended for most office use and quick
prints.
Enhanced
2400 X 600 dpi resolution. High-quality mode for fine lines and detail.
Recommended for vibrant, saturated, color prints. Balances printing
speed with quality.
Photo
1200 X 1200 dpi resolution. Highest-quality mode for color prints and
smoothest light colors. Recommended for photographs, smooth
shaded drawings, and vibrant color.
[(3) Development]
[(4) Primary transfer]
[(5) Secondary transfer]
[(5) Primary transfer]
[(7) Secondary transfer]
[(4) Primary transfer]
[(5) Secondary transfer]
[(8) Cleaning]
[(6) Cleaning]
[(6) Cleaning]
[(1) Changing
with electricity]
Developer Frame Assembly Imaging Unit
s6300-022