Xerox Phaser 6300 - Page 234

Print-Quality Troubleshooting 5-23
3
Check each Developer Assembly
roller for debris or damage,
Does the image quality improve?
Complete Go to Step 4.
4
Replace the Imaging Unit (page 8-5).
Does the image quality improve?
Complete Go to Step 5.
5
Replace the Transfer Roller
(
page 8-5).
Does the image quality improve?
Complete Go to Step 6.
6
Replace the Fuser (page 8-5).
Does the image quality improve?
Complete Go to Step 7.
7
Check that the springs on the Housing
Assembly Bias PL6.1.7 are not
damaged and are correctly aligned to
ensure contact with the Imaging Unit.
Are the springs in contact?
Go to Step 8. Repair or replace the
Housing Assembly
Bias.
8
Replace the HVPS (page 8-109).
Does the image quality improve?
Complete Replace the Engine
Control Board
(page 8-104).
Troubleshooting Procedure Table (Continued)
Step Actions and Questions Yes No