7-14 Phaser 6300/6350 Color Laser Printer Service Manual
Replacement Note
Be sure to re-install the wiring harness and connectors between the
Registration Roller and Engine Control Board as noted in Step 26. Failure to
correctly route the wiring can interfere with the Imaging Unit.
Insert the Registration Clutch into the opening first. Lower the opposite end
as the Registration and Turn clutches engage the gears.
30. Install the replacement Registration Roller Assembly.
31. Replace the Imaging Unit.
32. Lift the Retard Holder Assembly upward.
33. Move the assembly to the right to release the Retard Roller from the frame and
install the replacement.
34. Close Door A.
35. Open Door B.
s6300-158
To Next Page
Loading...
