Cleaning and Maintenance 7-17
41. Release the hook that holds the left side Roll Core retainer on the shaft and slide
it to the left.
42. Note the orientation of the Feed Roller and slide the Feed Roller left until the pin
on the shaft appears and rotate the Feed Roller to remove it from the shaft.
Replacement Note
With the Solenoid engaged, the flat portion of the Feed roller should face the
Bottom Plate.
43. Replace the left side Link and Spring, the Stopper Strap, and the Left Front
Cover.
44. Close Door B.
45. Remove Tray 2.
s6300-177
Bottom Plate
To Next Page
Loading...
