Xerox Phaser 6300 - Page 552

Index I-11
sensor failure error, 3-8
wiring
, 10-22
test pattern sample
, 5-6
test print
, 5-4
600 x 600 test print
, 5-8
analyzing
, 5-7
CMYK test print
, 5-4
engine test print
, 5-9
Service Diagnostics test prints
, A-11
service test print
, 5-8
setting test parameters
, A-12
Test Print Button
, 5-9
location
, 1-7
operation
, 5-9
Thermistor
, 2-18
Toner
density control
, 2-11
life count
, 1-12
metered
, 1-4
presence detect
, 2-14
transport
, 2-47
Toner Cartridge
, 2-45
failure error
, 3-8
metered cartridges
, 1-4
part number
, 9-60
presence detect
, 2-14
removal
, 8-6
remove ribbon error
, 3-7
replace toner cartridge error
, 3-7
validation
, 6-9
view life count
, 6-9
Toner Cartridge Assembly
, 2-45
Toner Cartridge Holder
, 2-45
components
, 2-45
part number
, 9-31
removal
, 8-85
Toner Cartridge In Sensor
, 2-46
actuator part number
, 9-31
bracket part number
, 9-31
removal
, 8-89
Toner Full Sensor
, 2-33
connector location
, 10-6
location
, 2-21
part number
, 9-21
removal
, 8-72
testing
, A-15
wiring
, 10-24
Toner Motor
, 2-46
connector location
, 10-5
drive train
, 2-46
location
, 2-45
precautions
, A-13
testing
, A-13
wiring
, 10-21
Transfer Roller
, 2-37
install or reseat error
, 3-7
life count
, 1-12
life count reset
, 6-9
location
, 1-10
part number
, 9-19
presence detect
, 2-13
removal
, 8-5
replace transfer roller error
, 3-6
Toner Full Sensor
, 2-13
waste toner reservoir
, 2-4
status
, 2-13
Tray
, 2-40
capacity
, 1-18
components
, 2-40
Feed Roller
removal
, 8-32
replacement kit
, 9-60
Feeder Chute
part number
, 9-9
guides
, 2-40
insert Tray 2~5 error
, 3-7
Label Kit
, 9-59
Low Paper Sensor
connector location
, 10-8
part number
, 9-13
removal
, 8-29
testing
, A-14
misfeed (jam T2~5) error
, 3-6
No Paper Sensor
part number
, 9-13
removal
, 8-28
numbering
, 2-7
optional trays
, 1-9
out of paper, load tray 2~5 error
, 3-7
paper handling
, 6-5
paper is low error
, 3-8