To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...How do I fix 'Jam at Tray 1' error on my Xerox Phaser 6500 Printer?
If your Xerox Printer displays 'Jam at Tray 1', it means paper is jammed inside the paper tray. Remove the jammed paper and then open and close the front cover.
Why does the toner smear when rubbed on printouts from my Xerox Phaser 6500?
If the toner smears when rubbed on printouts from your Xerox Printer, replace the paper if it is damp. If the paper is outside the recommended specification range, or the paper type setting is not correct, replace the paper with a recommended size and type and then confirm that your print driver settings are correct. Also, verify that the toner cartridges are Xerox toner cartridges and meet specifications, replacing if necessary. Finally, the fuser may be old or damaged and need replacement.
Why is my Xerox Phaser 6500 Printer making unusual noises?
If your Xerox Printer is making unusual noises, reposition the printer on a flat, stable surface to ensure it is level. Check that the paper tray is inserted properly; push it completely into the printer. Also, check for any foreign objects inside the printer; if found, turn off the printer and remove the object.
What to do if Xerox Phaser 6500 paper cannot be fed and keeps jamming?
If your Xerox Printer is experiencing paper feed issues such as paper jams, multiple sheets being fed, paper being fed at an angle, or wrinkled paper, ensure the paper is loaded correctly and is not damp. Replace damp paper with a new ream. Verify you are using the correct type of paper and that the paper tray is pushed completely into the printer. Place the printer on a stable, flat surface, and ensure the paper tray guides are set correctly. If multiple sheets are feeding, remove the paper, fan it, and load it again.
What does 'Low Density Xxx Cartridge' mean on Xerox Phaser 6500 and how to fix it?
If your Xerox Printer displays 'Low Density Xxx Cartridge', it means toner is not distributed evenly in the specified cartridge. Remove and shake the cartridge, then reinstall it.
Why is the Ready indicator not blinking on my Xerox Phaser 6500 Printer when I send a print job?
If you sent a print job to your Xerox Printer, but the Ready indicator is not blinking or on, check if the Ethernet or USB interface cable is disconnected. If so, turn off the power and check the connection of the interface cable. Also, verify if the protocol is configured and check the port status of the interface. Finally, ensure that the computer environment, such as the print driver, is correctly set up.
How do I resolve 'Jam at Tray 2' error on my Xerox Phaser 6500?
If your Xerox Printer displays 'Jam at Tray 2', it indicates that paper is jammed inside the paper tray. Open Tray 2 and remove the jammed paper.
What does 'Invalid Xxx' mean on Xerox Phaser 6500?
If your Xerox Printer displays 'Invalid Xxx', it means the wrong toner cartridge is installed or the toner cartridge is not seated correctly. Reseat the toner cartridge or replace it with one that meets the specifications for your printer.
What does it mean when the Error indicator is blinking on Xerox Phaser 6500 Printer?
If the Error indicator is blinking on your Xerox Printer, it means an error has occurred that you cannot correct yourself. Record the displayed error message or error code, turn off the power, and disconnect the power plug from the outlet.
How to fix 'Jam at Front Cover' error on Xerox Printer?
If your Xerox Printer displays 'Jam at Front Cover', it means paper is jammed inside the printer. Press the button to open the front cover and then remove the jammed paper.
General| Monthly Duty Cycle | Up to 40, 000 pages |
|---|---|
| Duplex Printing | Manual |
| Print Technology | Laser |
| Maximum Print Resolution | 600 x 600 x 4 dpi |
| First Page Out Time | As fast as 12 seconds |
| Connectivity | USB 2.0, Ethernet |
| Paper Capacity | 250 sheets + 1 sheet bypass tray |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Print Speed | Up to 24 ppm (color) / Up to 24 ppm (black) |
