To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if the Error indicator is on for Xerox Phaser 6500 Printer?
If the Error indicator is on for your Xerox Printer, check the control panel for an error message and correct the error as indicated.
How to troubleshoot Xerox Phaser 6500 when it has no power?
If your Xerox Printer has no power, first, ensure the power button is in the On position. If that's not the issue, check the power cord to see if it's disconnected or not securely connected; turn off the printer, reconnect the cord, and then turn it back on. Also, make sure the printer is connected to a power outlet with the correct voltage and not to an uninterruptible power supply or a power strip shared with high-power devices. Connect the printer to a suitable power outlet or a dedicated power strip.
Why is my Xerox Printer printing vertical black or color streaks?
If your Xerox Printer is producing vertical black or color streaks, the transfer belt unit may be old or damaged and require replacement. Ensure that the toner cartridges are Xerox toner cartridges and meet specifications; replace them if necessary. There may also be a problem with the toner cartridge for that color, so check the toner cartridge for damage and replace if necessary.
Why is my Xerox Phaser 6500 printing blank pages?
If your Xerox Printer is producing blank pages, remove the paper stack from the tray, fan it, then reinsert it to prevent multiple sheets from feeding at once. Verify that the toner cartridges are Xerox toner cartridges and meet specifications, replacing if necessary. Also, the transfer belt unit might be old or damaged and need replacement.
Why are the printouts from my Xerox Printer faded or have multiple colors faded?
If your Xerox Printer produces faded printouts or multiple colors are faded, verify that the toner cartridges are Xerox toner cartridges and meet the printer's specifications; replace them if necessary. Ensure that the paper being used is within the recommended specification range; replace it if needed and confirm the control panel/print driver settings are correct. Also, check if the paper is damp and replace it if necessary. Finally, the transfer belt unit might be old or damaged, and replacing it may resolve the issue.
General| Monthly Duty Cycle | Up to 40, 000 pages |
|---|---|
| Duplex Printing | Manual |
| Print Technology | Laser |
| Maximum Print Resolution | 600 x 600 x 4 dpi |
| First Page Out Time | As fast as 12 seconds |
| Connectivity | USB 2.0, Ethernet |
| Paper Capacity | 250 sheets + 1 sheet bypass tray |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Print Speed | Up to 24 ppm (color) / Up to 24 ppm (black) |
