3Com 5500G-EI - Page 339

Fabric Commands 319
UID CPU-Mac Prio Fabric-port Chips Mid Pid A/M
1 00e0-fc00-5502 10 UP/DOWN 2 0/1 3 A
2 00e0-fc03-5502 10 UP/DOWN 2 2/3 3 A
3 00e0-fc04-5502 10 UP/DOWN 2 4/5 3 A
6 00e0-fc05-5502 10 UP/DOWN 2 10/11 3 A
5 00e0-fc06-5502 10 UP/DOWN 2 8/9 3 A
4 00e0-fc07-5502 5 UP/DOWN 2 6/7 3 M
7 00e0-fc04-6502 10 UP/DOWN 2 12/13 3 A
8 00e0-fc01-5502 10 UP/DOWN 2 14/15 5 A
set unit name Syntax
set unit unit-id name unit-name
View
System view
Parameter
unit-id : Unit ID of a device.
unit-name : Unit name of a device. It is a string comprising 1 to 64 characters.
Description
Use this command to set a name for a device.
Example
Set the name "finance" for the device with unit ID 1.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]set unit 1 name finance
[SW5500]display xrn-fabric
Fabric name is SW5500, system mode is L3.
Fabric authentication : NOT SUPPORT, unit number : 1.
Unit Name Unit ID
finance 1(*)
sysname Syntax
sysname sysname
undo sysname
View
System view
Parameter
sysname : A string comprising 1 to 30 characters. By default, the fabric name of
Switch is
SW5500.
Description
Use the sysname command to change the name of the fabric where the current
device belongs. The modification will affect the prompt character in the command
line interface. For example, if the fabric name of the switch is
SW5500, the prompt
character in user view is
<SW5500>.