Fujitsu Oracle SPARC M12-2 User Manual

9.4.1 Dynamically Releasing a PCIe Card From a Logical Domain
288
9.4.2 Dynamically Releasing the HDD/SSD From a Logical Domain
290
9.4.3 Dynamically Releasing the SPARC M12-2S From the Physical
Partition 294
9.5 Stopping the System 305
9.5.1 Stopping a Specific Physical Partition 305
9.5.2 Stopping All Physical Partitions 307
9.6 Releasing FRUs From
the System 310
9.6.1 Releasing the SPARC M12-2S From the Building Block
Configuration 311
9.6.2 Releasing the FANU 313
9.6.3 Releasing the PSU 314
9.6.4 Releasing the XSCFU 316
9.7 Removing the SPARC M12-2S 318
9.8 Accessing a FRU 320
9.8.1 Lowering the Cable Support 320
9.8.2 Removing the Power Cords 322
9.8.3 Removing the
Front Cover 323
Chapter 10 Setting Up the System 325
10.1 Preparing Hardware 325
10.1.1 Installing a Power Cord 325
10.1.2 Securing the Cable Support 326
10.1.3 Installing the Front Cover 328
10.2 Restoring Setting Information 329
10.2.1 Restoring the Logical Domain System Configuration 329
10.2.2 Restoring XSCF Settings Information 331
10.3 Adding the SPARC
M12-2S to a Building Block Configuration 333
10.4 Incorporating a FRU Into the System 338
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023xii

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English