Fujitsu Oracle SPARC M12-2 User Manual

10.4.1 Incorporating the SPARC M12-2S Into a Building Block
Configuration 338
10.4.2 Incorporating the FANU 340
10.4.3 Incorporating the PSU 342
10.4.4 Incorporating the XSCFU 343
10.5 Diagnosing a Replacement FRU 346
10.5.1 Diagnosing the SPARC M12 Hardware 347
10.5.2 Diagnosing the XBU and Crossbar Cable 350
10.5.3 Checking the FRU Status After Maintenance
351
10.6 Incorporating the SPARC M12-2S or an I/O Device Into the PPAR
354
10.6.1 Incorporating the SPARC M12-2S Into the Physical Partition
Using PPAR DR 354
10.6.2 Incorporating an I/O Device Into the Physical Partition by
Using the Hot Plug Function 357
10.7 Incorporating I/O Resources Into a Logical Domain 360
10.7.1
Incorporating the Root Complex Into the Control Domain or
Root Domain 361
10.7.2 Incorporating the Root Complex Into the Stopped Root Domain
362
10.7.3 Incorporating the PCIe Endpoint Into the Logical Domain 363
10.7.4 Incorporating the SR-IOV Virtual Function 364
10.7.5 Incorporating Virtual I/O Devices Into a Logical Domain 367
10.8 Powering on
a Physical Partition 368
10.9 Starting the System 369
10.9.1 Starting the System With an XSCF Command 369
10.9.2 Starting the System From the OPNL 370
Chapter 11 Maintaining the XSCF Unit 373
11.1 Maintenance Precautions 373
11.2 Location of the XSCFU 374
11.3 Before Maintenance on the XSCFU 374
Contents xiii

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English