Fujitsu Oracle SPARC M12-2 User Manual

primary#
diskinfo -ap
(Omitted)
Label Disk name Vendor Product Vers
-------- ---------------------- -------- -------------- ----
HDD_0 c0t50000393D8289180d0
TOSHIBA MBF2600RC 3706
Physical path
--------------------------------
0: /pci@8000
/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000393D8289180,0
(Omitted)
XSCF>
showboards -a
PSB PPAR-ID(LSB) Assignment Pwr Conn Conf Test Fault
---- ------------ ----------- ---- ---- ---- ------- --------
00
-0 00(00) Assigned y y y Passed Normal
01-0 00(01) Assigned y y y Passed Normal
primary#
cfgadm -al
Ap_Id Type Receptacle Occupant Condition
(Omitted)
c2 scsi-sas connected configured unknown
c2::dsk/c2t50000394281B59D6d0
disk connected configured unknown
c2::es/ses0 ESI connected configured unknown
c2::smp/expd0 smp connected configured unknown
c3 scsi-sas connected unconfigured unknown
c4 scsi-sas connected unconfigured unknown
c5 fc connected unconfigured unknown
c6 fc connected unconfigured unknown
c7 scsi-sas connected unconfigured unknown
(Omitted)
the HDD/SSD based on the device path identified from the logical device name
of the HDD/SSD. For details on device paths, see "Appendix A Lists of
SPARC M12/M10 System Device Paths" in the Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 System Operation and Administration Guide.
2.
Check the BB-ID of the
SPARC M12-2S that houses the target HDD/SSD. (Take
this step only for a building block configuration connecting two or more
SPARC M12-2S units.)
The following example assumes that the user logs in to the XSCF shell and
checks the BB-ID of the SPARC M12-2S from the LSB number identified in step
1.
Releasing the HDD/SSD from the Oracle Solaris device configuration
3.
Check the mounting location of the target HDD/SSD (Ap_Id).
The following example checks the Ap_Id, including the logical device name of
the target HDD/SSD, from Oracle Solaris on the control domain.
4.
Release the HDD/SSD from the Oracle Solaris device configuration.
Chapter 9 Releasing FRUs From the System 293

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English