Fujitsu Oracle SPARC M12-2 User Manual

Table 9-11
Procedure for Dynamically Releasing the SPARC M12-2S From the Physical Partition
Step Operation Description Execution Location Command Used
1 Checking the physical partition
configuration and the operation status
of the target SPARC M12-2S
XSCF shell XSCF> showpcl -a
XSCF> showboards -p <ppar_id>
2Logging in to the XSCF shell and
confirming that the XSCF of the target
SPARC M12-2S is in the standby state
or is the slave XSCF. (*1)
XSCF shell XSCF> showhardconf
3 Checking the operation status of
logical domains
primary domain primary# ldm list-domain
4 Checking the connected virtual
services in the control domain
primary domain primary# ldm list-services
5 Checking the mounting locations of
the physical LAN ports
Service domain # dladm show-phys -L
6 Checking the virtual services and
hardware resources assigned to logical
domains
primary domain primary# ldm list-bindings <domain-name>
primary# ldm list-socket
7 Checking the assignment status of I/O
devices from the control domain in the
physical partition to which the target
SPARC M12-2S belongs
primary domain primary# ldm list-io
8 Releasing the assignment of I/O
devices of the target SPARC M12-2S
from the control domain in the
physical partition to which the target
SPARC M12-2S belongs
primary domain
When releasing a virtual disk
primary# ldm remove-vdisk <disk-name> <
domain-name>
When releasing a virtual network
primary# ldm remove-vnet <if-name> <
domain-name>
primary# ldm remove-vsw <vswitch-name>
When releasing an I/O device
primary# ldm remove-io <bus/device/vf-name>
<domain-name>
9Confirming that the I/O devices are not
assigned to logical domains,
from the
control domain in the physical
partition to which the target SPARC
M12-2S belongs
primary domain primary# ldm list-io
10 Using the XSCF shell to release the
target SPARC M12-2S from the
physical partition
XSCF shell
For maintenance on the target SPARC M12-2S
XSCF> deleteboard -c disconnect <psb>
For changing the physical partition
configuration
XSCF> deleteboard -c unassign <psb>
11 Checking the release process end
status from the XSCF shell
XSCF shell XSCF> showresult
12 Checking the status of the released
SPARC M12-2S from the XSCF shell
XSCF shell XSCF> showboards -va
*1 If the XSCF of the SPARC M12-2S to be released is the master XSCF, switch it to the standby state with the switchscf command. For
details, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual of the XCP version used.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023296

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English