Fujitsu Oracle SPARC M12-2 User Manual

XSCF>
addboard -y -c configure -p 0 00-0
PSB#00-0 will be configured into PPAR-ID 0. Continue?[y|n] :
y
Start connecting PSB to PPAR. [3600sec]
0..... 30..../
PSU On (BB#00)
. 60...../
CMU Reset Start (BB#00)
90.-
XB Reset 1 (BB#00)
...\
XB Reset 2 (BB#00)
.120.|
XB Reset 3 (BB#00)
....150.....180.....210.....240...../
270....-
CPU Reset 1 (BB#00)
.300.....330|
CPU Reset 2 (BB#00)
.....360.....390..\
Reset released (BB#00)
..
POST Sequence Start (BB#00)
.420.....450.....480.....510.
POST Sequence Complete (BB#00)
..end
Connected PSB to PPAR.
Start configuring PSB to Logical Domains (LDoms) Manager. [1800sec]
0|
Processing of the incoming DR request by the LDoms Manager is pendingIncoming
DR request is being processed by the LDoms ManagerDR sequence started
(sequence#=4, message#=2)
DR sequence finished (sequence#=4,
message#=2)
../
Processing of the incoming DR request by the LDoms Manager is pendingIncoming
DR request is being processed by the LDoms ManagerDR sequence started
(sequence#=5, message#=6)
../
Restoring primary succeeded, PCIE16 was assigned
. 30.
Restoring primary succeeded, PCIE17 was assigned
....-
Restoring primary succeeded, PCIE18 was assigned
60..../
Restoring primary succeeded, PCIE19 was assigned
.
90
Restoring primary succeeded, PCIE20 was assigned
../
Restoring primary succeeded, PCIE21 was assigned
...120.
Restoring primary succeeded, PCIE22 was assigned
.
Restoring primary succeeded, PCIE23 was assigned
...150.-
Restoring primary succeeded, 24 core(s) were assigned
....180.....210..-
Chapter 10 Setting Up the System 355

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English