Fujitsu Oracle SPARC M12-2 User Manual

Note -
The serial number of the server is printed on a label affixed on the front cover. Store
this cover such that it is not mixed up with the front covers of other SPARC M12 units.
If you have performed maintenance on the FANU when the server was in the
hot state, incorporate the FANU into the system as instructed in "10.4.2
Incorporating the FANU."
4.
Install the front cover.
For the procedure for installing the front cover to the front of the server, see
"10.1.3
Installing the Front Cover."
If you have performed maintenance on the FANU when the server was in the hot
state, the following step is not necessary.
5.
Place the server in the hot state.
Power on the server to place it in the hot state. For details on installing the power
cord on the PSU, see "10.1.1 Installing a Power Cord."
Figure 14-10
Installing the Power Cord
Chapter 14 Maintaining the Fan Units and Fan Backplane Unit 411

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English