Fujitsu Oracle SPARC M12-2 User Manual

Note -
When inserting the CMUL into the server, do not push any part other than the flat
parts of the CMUL levers. Pushing any other part may damage the CMUL.
3.
Insert the CMUU into the server.
a. When you insert the CMUU, open the CMUU levers (A in Figure 17-25) while
the PCIe cables are bundled with cable clamps.
b. Hold "HANDLING POSITION" (B in Figure 17-25) on the sides of the CMUU,
and insert it to the server up
to the tip of the "NEAR to END" display on the
top panel.
c. Then, push the flat tips of the CMUU levers (C in Figure 17-25) to insert the
CMUU into the server until it stops.
d. When the CMUU stops, close the CMUU levers to connect the CMUU to
the
server. When the CMUU levers are closed completely, tighten the fixing
screws (D in Figure 17-25) to secure the CMUU to the server.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023454

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English