Hach sc200 User Manual

Ultima® X Series Gas Monitors
For continuous monitoring of oxygen, toxics, and combustible gases
Because every life has a purpose...
MSA’s Ultima X Series Gas Monitors are microprocessor-based
transmitters engineered with the customer in mind. Utilizing
DuraSource Technology for extended sensor life, the monitors
are available in either stainless steel or polycarbonate
enclosure housings.
Now with SIL 2 Certified Products
HART Field Communications Protocol provides increased sensor
data, part of cost-eective asset management. HART also provides
convenient setup, calibration and diagnostics. Calibrate, set up or
perform diagnostics with HART from any point along the 4-20mA
line. HART also allows for existing component install and wiring to
be used, reducing installation costs.

Hach sc200 Specifications

General

Enclosure Rating	NEMA 4X/IP66
Operating Temperature	-20 to 60 °C (-4 to 140 °F)
Ambient Temperature	-20 to 60 °C (-4 to 140 °F)
Enclosure Material	Polycarbonate
Operating Humidity	0 to 95% non-condensing
Relay Outputs	Up to 4 SPDT relays
Storage Conditions	-40 to 70 °C (-40 to 158 °F)
Display	Graphical LCD
Inputs	2 digital sensor inputs
Outputs	4-20 mA
Power Supply	100 to 240 VAC, 50/60 Hz
Analog Outputs	2 or 4, 0/4-20 mA
Certifications	CE
Communication	Modbus RTU, HART
Dimensions	144 x 144 mm
Mounting	Panel mount
Output	4-20 mA
Power Requirements (Voltage)	100 to 240 VAC
Warranty	1 year
Weight	1.2 kg