18
Installation
3.4 Installing the Sensor in the Sample Stream
Figure 12 Sensor Installation Examples
• Install the sensor so the sample contacts is representative of the entire process.
• Mount the sensor at least 508 mm (20 in) from the aeration basin wall, and immerse it
at least 508 mm (20 in) into the process.
1. Sanitary mount 19. PVC Insertion mount
16. Union mount 20. Stainless steel insertion mount
17. Flow-through mount 21. Immersion mount
18. Hanging stainless steel sensor with the bale 22. Immersion mount, ball float
To Next Page
Loading...
