80459-641-01E Model 6 Motor Control Centers
10/2012 Section 4—Installing the MCC
© 1999–2012 Schneider Electric All Rights Reserved
47
ENGLISH
3. Remove the two 10-32 screws that secure the vent hood and closing
plate to the top of the cabinet (see Figure 58).
4. Once the vent hood is removed, secure the top closing plate by
reinstalling the 10-32 screws removed in Step 3 (see Figure 58).
5. Position the vent hood on the top of the cabinet as shown.
6. Secure the vent hood in place using the two 3/8-in. (9.525 mm)
bolts and washers removed in Step 2. Torque the bolts to 28–33 lb-in
(3.164–3.729 N
•m).
Figure 58: Reposition and Attach the Vent Hood
Top closing plate
Vent hood
To Next Page
Loading...
