Function Description – MI450 through MI474 – Signed Integer
NAME BITS FUNCTION DESCRIPTION
Device Fault – (any fault) 0 Set for all fault conditions
Calibration Active – Sensor 1 1 Set During Calibration
Calibration Active – Sensor 2 2 Set During Calibration
Calibration Active – Sensor 3 3 Set During Calibration
Warm Up Mode 4 Set During Startup
Low Alarm Active 5 Set While Alarm Relay is Active
Mid Alarm Active 6 Set While Alarm Relay is Active
High Alarm Active 7 Set While Alarm Relay is Active
Future 8
Future 9
Future 10
Future 11
Future 12
Future 13
Future 14
Not Used 15
Function Description – MI525 through MI599 – Signed Integer
0 = Normal Operation
1 = Caution
2 = Warning
3 = Alarm
B-9
To Next Page
Loading...
