Hach sc200 User Manual

NOTE: To label keys, insert keypad slides according to
Chapter 7, "Operating Panel Options".
I/Os
• 16 digital pnp or npn inputs available.
• 10 relay outputs available.
NOTE: All I/O technical specifications are provided in Chapter 4.
Not all inputs are used in the standard ModCon75
Controller.
Communications
RS232
• The controller has two COM ports which may be used to:
• download programs from a PC
• establish communications with devices using RS232 protocol.
Additional Communication Port
• The additional communication channel has been set up with an
Ethernet port.
NOTE: Information regarding other communication options can be
obtained from MSA Customer Service.
Programming
This programming function should only be used by an authorized MSA
Service Representative.
• ModCon75 Controller programs have PLC and HMI applications.
• Both applications are programmed via a PC using proprietary
software.
1-3

Hach sc200 Specifications

General

Enclosure Rating	NEMA 4X/IP66
Operating Temperature	-20 to 60 °C (-4 to 140 °F)
Ambient Temperature	-20 to 60 °C (-4 to 140 °F)
Enclosure Material	Polycarbonate
Operating Humidity	0 to 95% non-condensing
Relay Outputs	Up to 4 SPDT relays
Storage Conditions	-40 to 70 °C (-40 to 158 °F)
Display	Graphical LCD
Inputs	2 digital sensor inputs
Outputs	4-20 mA
Power Supply	100 to 240 VAC, 50/60 Hz
Analog Outputs	2 or 4, 0/4-20 mA
Certifications	CE
Communication	Modbus RTU, HART
Dimensions	144 x 144 mm
Mounting	Panel mount
Output	4-20 mA
Power Requirements (Voltage)	100 to 240 VAC
Warranty	1 year
Weight	1.2 kg