Name: Hach sc200
Brand: Hach
Rating: 5 (1 reviews)

To Next Page

To Previous Page

OPERATION

Eaton

9130 UPS (700–3000 VA) User's Guide S 164201718 Rev 3 www.eaton.com/powerquality

Table 3. User Settings (continued)

Default SettingAvailable SettingsDescription

Predictive Maintenance Notices [Enabled] [Disabled] Enabled

Remote Emergency Power-off (REPO)

Input Polarity

[Open] [Closed] Open

* See “Configuring Bypass Settings” on page 48.

Operating Modes

The Eaton 9130 front panel indicates the UPS status through the UPS

indicators (see Figure 17 on page 37).

Normal Mode

During Normal mode, the indicator illuminates solid and the UPS is

powered from the utility. The UPS monitors and charges the batteries as

needed and provides filtered power protection to your equipment.

The UPS may at times silently implement a High Alert mode, usually

when incoming utility conditions are unfavorable. In High Alert mode,

the UPS disables the battery support test to ensure maximum capacity

from the batteries if needed. The UPS will remain in High Alert for

24 hours or until changed by a Power Strategy command before

returning to its previous mode.

Optional High Efficiency and Energy Saving settings minimize heat

contribution to the rack environment. See “User Settings” on page 40.

Battery Mode

When the UPS is operating during a power outage, the alarm beeps

once every five seconds and the

indicator illuminates solid.

When the utility power returns, the UPS transfers to Normal mode

operation while the battery recharges.

Other manuals for Hach sc200

Questions and Answers:

Need help?

Do you have a question about the Hach sc200 and is the answer not in the manual?

General