EasyManua.ls Logo

Hach sc200 - Additional Display Formats; Example of Main Measurement Screen; Graphical Display; Icon Descriptions

Hach sc200
875 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 14 Example of Main Measurement screen
1 Home screen icon 7 Warning status bar
2 Sensor name 8 Date
3 SD Memory card icon 9 Analog output values
4 Relay status indicator 10 Time
5 Measurement value 11 Progress bar
6 Measurement unit 12 Measurement parameter
Table 5 Icon descriptions
Icon Description
Home
screen
The icon may vary depending on the screen or menu being
displayed. For example, if an SD card is installed, an SD card
icon appears here when the user is in the SD Card Setup menu.
SD memory
card
This icon appears only if an SD card is in the reader slot. When a
user is in the SD Card Setup menu, this icon appears in the upper
left corner.
Table 5 Icon descriptions (continued)
Icon Description
Warning A warning icon consists of an exclamation point within a triangle.
Warning icons appear on the right of the main display below the
measurement value. Push the ENTER key then select the device
to view any problems associated with that device. The warning
icon will no longer be displayed once all problems have been
corrected or acknowledged.
Error An error icon consists of an exclamation point within a circle.
When an error occurs, the error icon and the measurement
screen flash alternately in the main display. To view errors, push
the MENU key and select Diagnostics. Then select the device to
view any problems associated with that device.
Additional display formats
From the Main Measurement screen push the UP and DOWN arrow
keys to switch between measurement parameters
From the Main Measurement screen push the RIGHT arrow key to
switch to a split display of up to 4 measurement parameters. Push the
RIGHT arrow key to include additional measurements. Push the LEFT
arrow key as needed to return to the Main Measurement screen
From the Main Measurement screen push the LEFT arrow key to
switch to the graphical display (see Graphical display on page 22 to
define the parameters). Push the UP and DOWN arrow keys to switch
measurement graphs
Graphical display
The graph shows concentration and temperature measurements for
each channel in use. The graph supplies easy monitoring of trends and
shows changes in the process.
22 (nglisK

Table of Contents

Other manuals for Hach sc200

Related product manuals