Hach sc200 - Sensor 2 Preset Screen; Sensor 3 Preset Screen

• F6 will skip to sensor 2 presets screen (FIGURE 6-12)
• F6- Skips to next screen
• ENTER- Changes presets (see NOTE above)
• F6- Skips to next screen
• ENTER- Changes presets
NOTE: The ModCon75 Controller displays to one decimal point.
With certain sensors (ClO
2
, CO
2
, etc.), alarm setpoints in the
Ultima X3 unit may be represented to two decimal points. In this
Figure 6-13. Sensor 3 Preset Screen
Figure 6-12. Sensor 2 Preset Screen
6-10