Intel EP80579 Guide

Intel
®
EP80579 Integrated Processor Product Line—Synchronous Peripheral Interface (SPI)
Intel
®
EP80579 Integrated Processor Product Line
Platform Design Guide May 2010
201 Order Number: 320068-005US
16.2.3 Serial Flash Vendors
The following vendors manufacture serial flash devices that conform to Intel’s specific
requirements. For additional details on the compatibility requirements for SPI devices
see the Intel
®
EP80579 Integrated Processor Product Line Datasheet. Contact the flash
vendor directly for information on packaging and density.
ATMEL: http://www.atmel.com/
INTEL: http://www.intel.com/design/flcomp/prodbref/s33.htm
MACRONIX: http://www.macronix.com/
PMC: http://www.pmcflash.com/
SST: http://www.ssti.com/
STM: http://us.st.com/stonline/
WINBOND: http://us.winbond-usa.com/
Note: OEMs must fully validate any SPI flash device to ensure compatibility with their
platforms. This list should not be considered as a complete list of SPI vendors and is
not an indication of Intel approved devices or vendors. Contact your preferred flash
vendor directly to determine if they have a compatible device.
Table 74. Boot-up Strapping Options (Flash)
GPIO[17] GPIO[33] BIOS Bootup Option
0 0 Boot BIOS from SPI Flash
01 Reserved
10 Reserved
11
Boot BIOS from LPC FWH
(default)

Intel EP80579 Specifications

General

Brand	Intel
Model	EP80579
Category	Computer Hardware
Language	English