Intel
®
EP80579 Integrated Processor Product Line May 2010
Order Number: 320068-005US 228
Gigabit Ethernet (GbE) Interface—Intel
®
EP80579 Integrated Processor Product Line
• Gigabit Ethernet signals must be ground referenced.
• Route all traces over continuous GND planes, with no interruptions. Avoid crossing
over anti-etch if at all possible. Any discontinuity or split in the ground plane can
cause signal reflections and must be avoided.
• Minimize layer changes. Use a maximum of 4 vias per GbE trace for microstrip or a
maximum of 6 vias for stripline. Via count includes thru-hole connector as an
effective via. Use a maximum of six vias for stripline in order to connect to the AC
decoupling capacitors. If a layer change is necessary, ensure that trace matching
for either the transmit or receive pair occurs within the same layer.
• Do not route GbE traces under crystals, oscillators, clock synthesizers, magnetic
devices, or ICs that use and/or duplicate clocks.
To Next Page
Loading...
Need help?
General
